The jig is gonna guide you so you can just put your bit in. And it'll stop right at that collar that you. Set.

Because of its compact size and easy adaptability, the Kreg PHJ320 makes a great choice for most projects. At about the same price as the smaller Kreg R3, slightly more expensive than other fixed- position pocket hole jigs, and much less expensive than most professional models, the Kreg PHJ320 is a really good value.

R3 vs 320: Differences The 320 is more versatile than the R3 because its drill guides twist apart. A single 320 drill guide may be used to drill one pocket hole at a time in materials like plywood.

All. That's left is to drill your pocket holes. And drive screws to pull the joint. Together with pocket hole joinery. You can make rock solid wood projects. And long lasting repairs.

a 15° angle As you drill, the stepped drill bit enters the wood at a 15° angle. That's what creates the distinctive oval shape. The pocket-hole jig ensures this angle is consistent, and that the bit is held steady as you work - making the process of drilling an angled hole entirely foolproof.

Straight down then tip the drill at an angle trying to get the bit to exit.

In terms of strength, a pocket hole joint performs quite respectably. Although generally not as strong as a mortise and tenon or a comparable glue joint, a pocket hole joint is the equal of many of the other "quick and easy" joinery techniques such as a biscuit joint, a loose tenon, or a stub tenon and groove.

The simple answer to this question is yes. You can assemble pocket-hole joints without glue. We've always said that a joint made with Kreg Pocket-Hole Screws is so strong that glue is optional.

Speed is just one of the benefits of using pocket hole joinery. Another advantage is versatility, as illustrated by the photos below. You can use it to join two pieces of wood in just about any configuration - end to edge, end to face, mitered - you name it.

One of the advantages of pocket hole joinery is that you only need to use one clamp to complete a project - because each joint is assembled individually. Another advantage is that there's no need to wait for the glue to dry before continuing on with your project.

But pocket hole joinery isn't just for cabinet making. Simply stated, pocket hole joinery is one of the best methods for joining any two pieces of wood where a strong joint with no visible fasteners on one surface is the order of business.

In terms of strength, a pocket hole joint performs quite respectably. Although generally not as strong as a mortise and tenon or a comparable glue joint, a pocket hole joint is the equal of many of the other "quick and easy" joinery techniques such as a biscuit joint, a loose tenon, or a stub tenon and groove.