A: Absolutely. I used this on my 2x4's, 1x2's and 2x2's it's an extremely versatile product. Q:If I am assembling two different boards together one 1” thick and the other 3/4” thick…which thickness setting do I use?….. let's say I need to drill the 1” board.

And automatically positioning the drill guides perfectly to position the pocket holes exactly in your work. Piece one motion clamping sets the drill guides for every material thickness. Every time.

Here actually loosest. So i guess what you're doing is is you're just pointing. Um the minus arrow towards the jig. Itself. And now that the plus is towards the jig then that's now the tightest spot.

A pocket hole is simply a hole drilled at an angle that forms a pocket for the screw. Think of it as a highly engineered toenailing technique. What makes it precise is the design of the pocket hole jig that guides the drill bit into the wood at a specific angle to produce an engineered hole to house the screw head.

38 mm The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).

Automaxx® dual-action clamping technology helps you save time and effort by simultaneously clamping your workpiece and automatically adjusting to the exact thickness of your material (from 1/2" to 1 1/2").

All. That's left is to drill your pocket holes. And drive screws to pull the joint. Together with pocket hole joinery. You can make rock solid wood projects. And long lasting repairs.

And set the shoulder of the bit to that same thickness. And tighten. Make sure that your wood is clamped tightly. Into your jig. Place your bit in your drill. And you're ready to drill your holes.

While glue or adhesives may sometimes be used, most wooden workpieces are connected via a joint. A joint is a natural connection where the ends of two wooden workpieces meet. It's designed to hold the wooden workpieces together, thus eliminating the need for glue or adhesives.

A splice joint is a method of joining two members end to end in woodworking. The splice joint is used when the material being joined is not available in the length required. It is an alternative to other joints such as the butt joint and the scarf joint.

13 mm The Kreg Pocket-Hole Jig 720 Pro is the professional, fast and efficient connection system with premium accessories. With this system you can make very strong pocket holes in materials with a minimum thickness of 13 mm (1/2”) and a maximum thickness of 38 mm (1 1/2”).

All the Kreg jigs I can see say their maximum thickness is 1.5 inches / 38mm.