In addition to the standard line of straight-cut blades, Dremel offers another line of flush-cut blades, perfect for cutting right up to the edge of a wall, for example. The Dremel Ultra-Saw also accepts abrasive surface prep wheels, so it can clean up concrete, masonry, or walls before tiling.

Although the Dremel Ultra-Saw US20V is compact and cordless, it's extremely powerful and quite versatile for its size (it rotates 90 degrees for use as a sanding tool or angle grinder, too).

3/4th Depth of Cut Cut up to 3/4" with Dremel's 3.5" and 4" wheels.

Q: Will these wheels fit on the Dremel Ultra Saw? The Ultra Saw can use both blades. However the Saw Max can only use Saw Max blades.

This 3.5 In. diamond wheel cuts a variety of tile including wall tile, floor tile, porcelain, slate, stone, and cement backer board. May also be used as a fast way to remove grout.

For cutting many different materials, from wood and plastic to metal and porcelain. Especially suitable for straight and thin cuts. For example, to cut through both hard and soft types of wood, use the Wood Cutting Wheel.

An angle grinder is not a cutting tool in the same sense as a circular saw. Angle grinders are fitted with abrasive wheels, not blades. These wheels operate by abrading the material they come into contact with. These wheels are not suitable for cutting wood: they have no teeth.

Dremel 545 and EZ545 are both diamond wheels great for cutting, sawing and carving hard materials; such as, marble, concrete, brick, porcelain, ceramics, hard epoxy and soft and hard wood. Do not use them on metals.

3.5-inch A Sharp Addition to the Dremel Line The corded version actually uses a smaller (3-inch) blade (SM series), while the Ultra-Saw takes a slightly larger (3.5-inch) blade (US series), so the Dremel Ulktra-Saw Cutting Kit (US700) works only on the cordless version since the blades are 3.5 inches (or 4 inches) in diameter.

For this project secure. Your tile and the multi-vise. And mark your desired cut and set your tool to a maximum speed of 20,000 rpms. Using two hands to grip and guide the tool.

Dremel cutting accessories are ideal for cutting a variety of materials including metals, soft & hard woods, fiberglass, plastics & metals.

What can you do with it? For slicing and cutting metal including hardened steel. Ideal for cutting, grooving and trimming all kinds of metal. Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver.

Absolutely. Not um with this solid disc all you'll do when you're trying to cut wood is create a lot of friction. For a lot of heat a lot of burn. And therefore a lot of smoke.

An angle grinder is not a cutting tool in the same sense as a circular saw. Angle grinders are fitted with abrasive wheels, not blades. These wheels operate by abrading the material they come into contact with. These wheels are not suitable for cutting wood: they have no teeth.