The DriTac is Winn's tackiest ever. The WinnDry polymer material combines a cushioned, comfortable feel with exceptional non-slip performance in all weather conditions. Rain or shine, the DriTac delivers.

ADVANCED VERTICAL SEAM ADVANCED VERTICAL SEAM (AVS TECHNOLOGY) AVS is Winn's patented single-panel wrapping method. A sheet of polymer grip material encloses the underlisting lengthwise, resulting in a vertical seam that seals the grip on the backside.

Quickly bring the grip parallel to the floor and slide it. On. Before the solvent drives be sure to check the grips. Alignment. Allow the grip to drive for 30 minutes before. Use you.

Re-gripping a Winn grip Remove the old grip with a hooked blade in a utility knife taking care to always cut away from yourself. Be extremely careful when dealing with graphite shafts, as you do not want to cut into the shaft. Peel off the old tape by hand and clean up the residue with a cloth and grip solvent.

A grip with some sort of cotton cord infused in the rubber - think Golf Pride's Tour Velvet Cord - is designed to wick away moisture and keep the surface tacky, so you might want to do some more research and consider a change.

(Reverse Overlap) The Conventional (Reverse Overlap) Grip That makes it no surprise that it continues to be the most common grip on the PGA Tour. With this one, you start with your dominant hand lower. Then, the forefinger of your non-dominant hand overlaps your dominant hand's fingers or interlocks with the pinky on your dominant hand.

Grip-Tac™ Self Adhesive is a printed vinyl film with a pressure sensitive adhesive. Historically used as a shelf liner, this product has too many uses to all be mentioned here. Combining classic patterns and of-the-moment colours and styles, Grip-Tac™ adhesive covering is quickly becoming the leader in the industry.

(Examples: L56, M58, M60, M62) » If the core size is followed by the “R” it indicates the grip profile is ROUND. No “R” indicates a Ribbed Grip. Golf Pride sometimes uses the designation “X” to indicate a Ribbed Grip.

To clean a Winn grip, apply a small amount of water to a soft towel, and gently rub the grips. Do not saturate the towel. Never use a brush and soapy water to clean a Winn grip because it may damage the top surface and destroy the tackiness and slip-resistance of the grip.

Once it is aligned wipe down your new grip to remove all fluid. And allow your grips to dry for 6 to 8 hours before using them. For more grip tips visit Lamkin grips calm.

Make sure you wipe off the bars first. If you're reinstalling the old grips make sure you let the grip air dry for a few minutes first so the wd-40. You use to remove it has time to evaporate.

Our collection of golf club grips are designed to provide best grip for sweaty hands. Whether you choose the Golf Pride Z-Grip Cord Grip, the Winn Dri-Tac Wrap Grip, or the Winn Dri-Tac Grip, you can be sure that you are getting a quality grip that will keep your hands dry and comfortable.

Check the label for aluminum-based compounds such as aluminum chloride, which help to shrink the sweat glands temporarily. Your best bet? "Use an extra-strength aluminum chloride-based antiperspirant such as Certain-Dri," says Dr. MacGregor.