As Robin mentioned, the SoundLink Revolve can be connected to a TV using a 3.5 mm audio cable, or Bluetooth if your TV transmits Bluetooth audio. Out of these two options, we would recommend the wired connection, as you may experience a delay between audio and video when using a wireless connection.

The audible voice prompts that your system announce (i.e. battery status and connection prompts) can be turned on or off, depending on your preference.

Product settings are not lost during this reset.

1. Press and hold the Mute. button for 10 seconds until the lights on the speaker briefly blink.
2. Press the Power. button to turn the system back on, then resume normal use.

Check the volume level of the Bose system. Be sure the system volume is not turned down. Using the volume control, gradually increase the volume level.

Yes, you can connect your Bluetooth speaker to your smart TV by pairing the two devices together using TV settings.

Reset the HDMI connection by resetting both devices and the cables connected between them. Turn off the Bose system, the source device and the TV. Unplug the Bose system, the source device and the TV. Disconnect two HDMI cables at both ends and reseat them ensuring secure connections.

You will now be able to play audio in unison using your devices to put the speakers into stereo mode. Press the Bluetooth. And plus button on either speaker wall in party mode release.

A voice prompt is a recorded script that is played by IVR, auto attendants, message-on-hold systems, and other voice processing tools commonly used by businesses. The "prompt" as its name suggests prompts or guides the caller by requesting that they provide the system with information.

Press and hold the Power button for 10 seconds:

1. After a few seconds, the battery lights glow to show the battery level. If voice prompts are on, the battery level is also announced.
2. After 10 seconds, the Bluetooth® light blinks blue to confirm the speaker is reset.

Product settings are not lost during this reset.

1. Press and hold the Mute. button for 10 seconds until the lights on the speaker briefly blink.
2. Press the Power. button to turn the system back on, then resume normal use.

Make sure that the speaker has a BLUETOOTH connection with the BLUETOOTH device. Pair the speaker with the BLUETOOTH device again. The volume of the speaker or BLUETOOTH device may be low. Adjust the volume to a moderate level.

Restore the factory settings of your speaker. Press and hold the Power button for 10 seconds: After a few seconds, the battery lights glow to show the battery level. If voice prompts are on, the battery level is also announced. After 10 seconds, the Bluetooth® light blinks blue to confirm the speaker is reset.