And rinse everything under running. Water once all parts are clean and dry it all goes back together the same way it came apart reinsert the tabs onto the brush rolls. And angle the end into the gear.

The Hoover spotless gives you a convenient way to deep clean. First press the latch on the solution tank tilt. And lift it to remove twist. Off the cats then fill the tank with the appropriate.

To use the spot chaser press here to release. It. Then simply aim and push the button to pre-treat spills and stains. Allow several minutes for the solution to absorb into the fibers.

And get rid of any air trapped in the hose. And that's it if you have any questions please feel free to reach out to us.

Carpet cleaners help to restore the appearance and extend the life of your carpets. They're very effective at removing heavy soiling or staining and are great for high-traffic homes. Some cleaning solutions kill germs.

Deep Clean Mode powerfully removes embedded dirt and stains for whole home cleaning, while Quick Clean Mode with HeatForce speeds up drying to allow carpets to dry in less than 45 minutes – getting you back on your floors faster.

Baking soda and vinegar: Sprinkle baking soda on your carpets and let it sit for a few hours before vacuuming it up. Then, mix equal parts white vinegar and water in a spray bottle and spray the solution on the carpet. Let it sit for a few minutes before blotting it up with a clean cloth.

Your carpet will be only slightly damp to the touch after your cleaning. Most carpets typically need 6-10 hours to dry completely.

Yes, you can use carpet cleaner on a couch! However, you need to be careful and test a small area first. Some carpet cleaners contain harsh chemicals that can damage delicate fabrics. If you're unsure, it's always best to contact the manufacturer of your carpet cleaner and ask for their advice.

Solution. When you are finished turn the power off remove. And empty the dirty water tank. And store the tool attachment and hose on the back of the cleaner.

A possible cause might be that the tank is not properly seated. To assure the tank is seated properly, pick it up and re-seat is so it sits snugly on the unit. If this doesn't fix the problem, make sure the tank is assembled properly. To make sure they are both latched properly, pick the tank up by its handle.

make sure the dirty water tank plug is firmly in place on top and the black duct bill gasket is in place on the bottom before replacing the tank. now check for any cracks or clogs in the hose with the tool removed try suctioning water from a cup lift.