0.080 in. The RYOBI 40V X Expand-It Cordless Trimmer comes with premium 0.080 in. dimpled line and the REEL-EASY bump-feed string head for faster reloads, usually found only on gas trimmers.

A Ryobi 40V, 4-amp battery can take up to one hour to recharge for each 25-percent increment, requiring as long a 4-hours to completely recharge a discharged battery.

This edger attachment can be used with Ryobi, Toro, Weed Eater, Troy Bilt, Murray, Poulan Pro Trimmers and other universal brand fit power heads and trimmers.

Now we thread through one end through that eyelet. And the other. End through that eyelet.

Thicker string takes more power to spin up, is noisier, and your spool won't hold as much. But, DAMN!! it'll eat thick weeds, bang curb edges free from weeds, and hold up better when you run it over cement… like when you line trim interlock. .

Line thickness, vegetation and brushcutter power

1. The thinnest trimmer line (1.2 to 2mm) is designed for short grass and low-growing plants such as ray grass and clovers.
2. Thicker trimmer line (up to 3mm) is designed for longer grass and can be used for medium-powered trimmers or brushcutters.

Battery runs for a minimum of 50 minutes. Charge it up and its ready to go for the next mowing.

Now another light that I actually have never seen personally is this testing one this is going to be kind of an Amber. Uh. Color. And. So again you may get a battery that registers as testing.

There are two styles of battery with Ryobi units the 18v range and the 36v range. These are different batteries and are not interchangeable. Every tool that states it is 18v can interchange its battery with other 18v units and 36v tools can interchange their battery with other 36v tools.

With a Badaptor, you can convert your 18-20V DeWalt battery to work with the entire range of Ryobi 18V tools.

Place crank attachment on grouped section of the trimmer head and rotate clockwise to reload line until six inches remain on each. Side you.

Started. If you have your own string. And just want to reuse the spools look for this little hole on the side feed your new string through it. And then just simply pull it tight and wrap it around.