And set the shoulder of the bit to that same thickness. And tighten. Make sure that your wood is clamped tightly. Into your jig. Place your bit in your drill. And you're ready to drill your holes.

Kreg Tool Company is a growing, employee-owned, tool-manufacturing company with our global headquarters located in Ankeny, Iowa. We manufacture a wide variety of tools, accessories, and equipment for woodworkers and do-it-yourselfers.

the USA Kreg tool company is located in Huxley, Iowa. The box says "made in the USA of US and Imported Materials". Like so many things in this global economy materials are from the US and other countries. The product is made in the US.

So you can build with solid wood or plywood. From half inch to one and a half inches thick. All you do is slide the drill guide to the stop that most closely matches the material thickness.

A pocket hole is a form of joinery that creates a tight bond between two pieces of wood without using glue. The screw is drilled in at a 15-degree angle. But first, a pocket hole is drilled into to create the perfect entry angle for the screw.

Then we'll tighten the screw with the hex. Wrench. Next we'll set the thickness stops. Just press the gray tabs and push the stops to match the thickness of our material. Now we can add the clamp pad.

Craig Sommerfeld After Craig Sommerfeld developed a U-shaped single-hole jig to hide the holes in kitchen cabinets that he was building in his home (per Kathie Sommerfeld's request), the jig began being sold at woodworking shows. Proving to be a major success, Kreg Tool was officially born. The first patent was issued for the Kreg Jig.

Since our humble beginning as a family-owned company in 1989, the Kreg name has become synonymous with pocket-hole joinery. Woodworkers of all skill levels have come to trust our products time and time again. Pocket-Hole Jigs. Jig System Components. Pocket-Hole Screws & Plugs.

The Kreg Pocket-Hole Jig 520 Pro is a practical and versatile jointing system. This system allows you to create very solid pocket holes in materials with a minimum thickness of 13 mm and a maximum thickness of 38 mm. The Pocket-Hole Jig 520 Pro has a number of unique points.

And cut costs a do-it-yourselfer with a long list of projects to build or a woodworker who just wants to make a great joinery technique even better the foreman has what it takes with the foreman.

Place a pocket hole close to each end, and then space them out every 6″ to 8″ in between. Hopefully, these tip make pocket-hole spacing easier to understand, and will help you make strong joints that last, and make them fast on your next project.

You can use it to join two pieces of wood in just about any configuration - end to edge, end to face, mitered - you name it. Consequently, the uses of pocket hole joinery in the construction of a project are almost unlimited. Assembling structural frames and cabinet face frames is a common application.

Kreg Tool Company is Founded After Craig Sommerfeld developed a U-shaped single-hole jig to hide the holes in kitchen cabinets that he was building in his home (per Kathie Sommerfeld's request), the jig began being sold at woodworking shows. Proving to be a major success, Kreg Tool was officially born.