Coverage. Spread rates will vary depending on the porosity of the surface. On smooth surfaces, 0300 series covers approximately 450-650 square feet per gallon, 200-300 square feet per gallon on rough surfaces. 1300 and 16300 series cover approximately 200-300 square feet per gallon on smooth surfaces.

Cabot semi solid deck stain It lasts for 6-7 years before I have to do it again. I haven't had to do the pickets in at least 10 years.

Two-coat application recommended. Stir thoroughly before use. Apply with a high-quality stain brush.

approximately 450-650 square feet Semi-Transparent Deck & Siding Stains may be intermixed to achieve color variations of the standard color palette. Coverage: On smooth surfaces, approximately 450-650 square feet per gallon; on rough surfaces, 200-300 square feet per gallon.

Coverage Spread rates will vary depending on the porosity of the surface. On smooth surfaces, 3000 series covers approximately 400-600 square feet per gallon, 19200 series covers approximately 250-350 square feet per gallon.

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

Types of Wood Stains Solid wood stains: Just like regular paint, solid stains hide the grain of the wood, and the best should last three to five years on a deck, the longest of the three types of stains.

After you're finished applying, leave your deck to dry for 2 hours before applying a second coat. Wait another 2 hours and it's ready to walk on. Too easy!

Stains and oils penetrate wood best when it's cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat.

Stains need between 12-48 hours to fully dry. If water comes into contact with your newly stained deck before it's dry, the water will soak into the pores of the decking material and displace the stain.

Stains and oils penetrate wood best when it's cool and dry. If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat.