What is Wheeler Engineering Ultra Scope Mounting Kit?
The Wheeler Engineering Ultra Scope Mounting Kit is a comprehensive kit that includes everything you need to properly mount your rifle scope for a secure and precise fit. Whether you're a seasoned shooter or a novice, this kit has all the tools you need to make sure your scope is mounted correctly every time.
The kit comes equipped with a variety of lapping tools and a scope ring alignment bar that helps to align your scope rings and ensure they are level with each other. This alignment tool is critical to ensuring a clear and accurate sight picture when using your rifle scope.
In addition to the alignment tool, the kit comes with a torque wrench and a range of torque bits that are specifically designed to properly tighten your scope rings and other mounting hardware to prevent any movement or loosening over time. This is important for maintaining a consistent zero and accuracy with every shot.
The kit also includes a comprehensive set of instructions that guide you through the mounting process step-by-step. This makes the Wheeler Engineering Ultra Scope Mounting Kit an ideal choice for those who are new to rifle scope mounting or those who are looking for a kit that provides everything they need for a successful and hassle-free mount.
Overall, the Wheeler Engineering Ultra Scope Mounting Kit is an excellent choice for anyone looking to mount their rifle scope with precision, ease, and confidence. With its comprehensive set of tools and easy-to-follow instructions, this kit is a must-have for any rifle enthusiast or hunter.
Frequently Asked Questions about wheeler engineering ultra scope mounting kit
Some shooters like to let a professional gunsmith mount a new scope, but you can mount it yourself without any fear of ruing the precision of your rifle. Mounting your scope yourself also means you can fit it to your exact measurements, matching it up to your shoulder for that bespoke fitment.
Incrementally tighten your scope ring screws to our recommend torque-poundage – about 15-18in. lbs, without the use of any thread-locker. If you're mounting horizontally split rings, be mindful of the gaps on either side of the rings, trying to keep them evenly spaced.
Three to 4 inches
Properly mounted, a scope should never whack your nose. Can't find the sweet spot, that full circle of light? Your eye is too close to or too far from the ocular lens. Three to 4 inches is about right.
Remember your scope is a precision instrument and just a tiny shift can throw your point of impact off by inches even feet which could cost you a clean shot or cause a miss. If the screws are too tight, they can damage your scope, or the screws can strip making them difficult to next to impossible to remove.
What range is a 3-9×40 scope good for? For this model, a range of 50 yards to 300 yards is ideal.
Our recommendation is no less than 1/8th of an inch of clearance between the bottom of the objective and the top of the barrel. Your second choice (0.160) [for scope base height] will give you enough clearance.
Using tall rings for all your scopes may seem like the obvious solution to this, but it's not the best solution. To get the most out of your scope's range of elevation adjustment, you will need to mount the scope as close (or low) to the receiver as possible. One exception to this is your cheek weld.
Pounds. Then tighten both bottom screws at the same 16 to 18 inch. Pounds. Be sure all screws are tight when. Complete. At this point your rings have been tightened properly. And you're set.
Incrementally tighten your scope ring screws to our recommend torque-poundage – about 15-18in. lbs, without the use of any thread-locker. If you're mounting horizontally split rings, be mindful of the gaps on either side of the rings, trying to keep them evenly spaced.
900 feet
The answer is really simple: a 3-9X riflescope provides an additional level of magnification for every 100 feet, all the way out to 300 yards (900 feet). For many years, 300 yards was about the limit of what most big-game hunters considered to be an ethical shooting distance.
For most people who hunt between 50 and 500 yards, a 3-15 magnification range will be more than enough.
Most manufacturers will note the eye relief distance. Most modern scopes have generous eye relief, usually around 3 – 5 inches, giving you plenty of mounting space. Higher magnification, older and rimfire scopes may have less eye relief.
about 3 1/2 inches
Eye relief is the distance from the rear lens your eye requires to see a full picture. The industry average for a fixed-power scope is about 3 1/2 inches. For most variables, you'll start out about there at the lower power, and about 2 1/2 inches when you crank up to to max magnifcation.
