Inside you'll find a purple button otherwise known as the learn. Button. Simply push and release the learn. Button then push and release the button on the remote.

The location of the learn button. Compared with other models, the learn button is not on the opener itself, it is on the myQ Control Panel. The learn button on the opener is used only for setting the travel limits and force.

So step 3 is push the remote control or smart panel button and this will set the up position. And immediately begin the door descending. You want to push the purple. Button which will stop the door.

LiftMaster LEARN Button Location On Smart Openers Grab a ladder and look for a cover, either decorative or part of the lighting housing and pull it down or sideways. Once the cover is out of the way, you'll see a dashboard with buttons and LED lights. The round yellow button is the LEARN button.

The Learn/Program button on residential garage door openers is used to program various accessories, clear the opener's/operator's memory, set travel and force adjustments, and depending on your model enable Wi-Fi programming.

Password. And you should only have to wait a moment before it's connected. You can give your garage door opener a name if you like then hit next now as far as getting it connected to your wi-fi.

And LiftMaster operating unit prepped. It is time to enter your DG code that opens your garage door to do this. Type your preferred. Four digit code on the keypad remember to choose random.

That's. It test by pressing the programmed button the garage door will move follow. These same steps to program the other buttons.

The button may be either green, orange, red, purple, or yellow, and beside it is a small LED. Press and release the “Learn” button. Within 30 seconds of pressing the "Learn" button, press and hold the button you wish to program on the remote control for three seconds, then release.

Single and 3-Button Remote Controls The single button controls the garage door, while the three-button model can be programmed to operate three separate devices such as additional openers (handy if you have a three-car garage), lights, and gates.

With MyQ Home Bridge hardware and access to the HomeKit platform, users can open, close, or check the status of their garage doors, and turn MyQ-connected lights on or off using the Home app via their iPhone®, iPad®, iPod touch® and Apple Watch®, or using Siri®.

With myQ connectivity, our garage door openers, gate operators and commercial door operators can be controlled right from your smartphone or through our cloud-based software.