Connect to Network

1. Slide the. Power switch. to the SETUP position to enter Preview mode.
2. Press the. Menu button. to access the Setup menu.
3. Select the. Wireless tab. (signal bars located on the far right).
4. Select. Diagnostic. .
5. Select. Activation/Reboot. .
6. After device restarts, repeat. steps 2-4. then select.

Mobile app setup guide

1. Download and open the Spartan Camera Management app.
2. Input the camera module ID IMEI/MEID number.
3. Use the navigation buttons to go to the "Wireless" setting page on the camera.
4. A registration code will be displayed on the camera screen, input this 5 digits code into the app.

And a sim card for more information on these preparation materials check out our other video. Once you have downloaded the spartan camera management app onto your ios or android smartphone.

To connect a WiFi camera to an Android phone, follow these steps:

1. Download the camera's app from the Google Play Store.
2. Turn on the camera and connect it to your WiFi network.
3. Open the app and follow the on-screen instructions to connect the camera to your phone.

Press connect to dash cam and allow location and network access to download dashcam videos press view dash cam. Videos. Press the download button in the bottom left select your video and press done.

Send via is premium. Go down to register camera and press ok to enter. The registration. Code number will be listed here add this on the website and click Submit.

And you'll also need the Google home app on your phone to set everything up. Once they're paired look for the chromecast button in apps to send video and audio to your television.

1. Wired Connection: CCTV cameras can be connected to a DVR or NVR using physical cables like coaxial cables or Ethernet cables.
2. Local Network: If you're using IP cameras (Internet Protocol cameras), they can be set up on a local network without requiring an internet connection.

Wi-fi. For your first time connecting you'll be prompted to enter a password. To verify that you are connected to the dash cam the dash cam should now display a wi-fi connected.

Select your blackvue model from the list then enter or paste the wi-fi password to connect.

(This can be done by going to the settings in your Android phone and turning on the "hotspot" function - usually called "mobile hotspot" or "portable hotspot". Set a password for the hotspot connection.) Connect the camera to the Android phone's hotspot-enabled Wi-Fi network.

Mobile app setup guide

1. Download and open the Spartan Camera Management app.
2. Input the camera module ID IMEI/MEID number.
3. Use the navigation buttons to go to the "Wireless" setting page on the camera.
4. A registration code will be displayed on the camera screen, input this 5 digits code into the app.